Sega After Burner Climax Owner's Manual page 134

4
Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then
squeezed dry.
5
Remove the CRADLE.
When removing the retaining ring (E ring), be very careful so as not to bend the rotary shaft.
13
6
Remove stain from the rotary shaft and shaft receiving portions by wiping off with a soft cloth, etc.
7
After wiping off as per 6 above, further apply a dry cloth, etc. to cause the Coin Selector to dry completely.
Coin Insertion Test
Once every month, when performing the Coin SW Test, simultaneously check the following:
Does the Coin Meter count satisfactorily?
Does the coin drop into the cashbox correctly?
Is the coin rejected when inserted while keeping the REJECT Button pressed down?
128
Insert a coin while keeping
the REJECT Button pressed down
and check if it is rejected
FIG. 13c
CRADLE
FIG. 13b
Coin Meter