Sega After Burner Climax Owner's Manual page 146

TABLE 17 PERIODIC INSPECTION TABLE
CABINET
MONITOR
17
CONTROL STICK
THROTTLE LEVER
COIN SELECTOR
GAME BOARD
ELECTRICAL/
ELECTRONIC PARTS
POWER CABLE
CABINET INTERIOR
CABINET SURFACES
MOVING MECHANISMS
SAFETY EQUIPMENT
Cleaning the Cabinet Surfaces
When the cabinet surfaces become dirty, remove stains with a soft cloth soaked in water or diluted (with water)
chemical detergent and then wrung dry. To avoid damaging the fi nish, do not use such solvents as thinner, benzene,
etc. (other than ethyl alcohol) or abrasives (bleaching agent and chemical dust-cloth).
Some general-purpose household, kitchen, and furniture cleaning products may contain strong solvents that degrade
plastic parts, coatings, and print. Before using any cleaning product, read the product's cautionary notes carefully
and test the product fi rst on a small area that is not highly visible.
140
ITEMS
Confirm that adjusters contact
fl oor
Check screen adjustment
Inspection of volume, switch
Greasing
Inspection of volume, switch
Greasing
Inspection of coin switch
Coin insertion test
Coin Selector cleaning
Check of board information
Check of settings
Inspection
Inspection, Cleaning
Cleaning
Cleaning
Maintenance
Grease up
Seatbelt
Motion stop button
Floor sensor
Bellows
DESCRIPTION PERIOD REFERENCE
Daily 3
Monthly or 6 7 , 10-3
when moving
1 month 9-3a
3 months 11-2
1 month 9-3a
3 months 12-1
1 month Service manual,
Chapter 4
1 month Chapter 13
3 months Chapter 13
1 month Service manual,
Chapter 4
1 month 9-3c, 9-3d
As appropriate Previous page
1 year See above.
1 year See above.
As appropriate See below.
1 year Previous page
Daily Chapter 15
Daily 9-5
Daily 9-5
Daily 9-5, 14
6 month Chapter 16