Table of Contents
Advertisement
Use
64
7.18 Use in vehicles for transporting persons with reduced mobility
7.18.1 Avantgarde DV/DS without CLT and CLT Ultra options
WARNING
Use in vehicles for transporting persons with reduced mobility
Serious injuries in case of accidents due to user error
► Always use the seats and personal restraint systems in the vehicle for transporting persons with reduced
mobility first. This is the only way to ensure optimum protection of passengers in the event of an accident.
► If the product is to be used as a seat in a vehicle for transporting persons with reduced mobility, the safety
elements offered by the manufacturer and appropriate fastening and personal restraint systems must be used.
For more information, please refer to our brochure with the order number 646D158.
► Never transport more than one person in the product.
► Only use the product in a vehicle for transporting persons with reduced mobility with the back support in a
vertical position.
► Observe the limitations regarding installed options (see Page 39).
WARNING
Use of the belt system as a passenger restraint system in vehicles for transporting persons with reduced
mobility is forbidden
Serious injuries due to improper handling of the product
► Under no circumstances may the belts and positioning aids offered with the product be used as part of a pas
senger restraint system in vehicles for transporting persons with reduced mobility.
► Note that the belts and positioning aids offered with the product are only intended to help support the user sit
ting in the product.
The product has been tested by the manufacturer according ISO 7176-19 and may be used as a seat in vehicles
for transporting persons with reduced mobility subject to the conditions defined below.
The product must be sufficiently secured during transport in vehicles for transporting persons with reduced mobil
ity. The illustrations that follow show an example for anchoring in a motor vehicle.
The manufacturer is not responsible for the fastening systems that are used. Ensure that only fastening systems
that meet the applicable legal requirements and are designed for the overall weight of the product including the
user are used.
The transport weight of the person to be transported in a vehicle for transporting persons with reduced mobility
corresponds to the maximum permissible user weight (see Page 45).
7.18.1.1 Required accessories
Four belt loops are necessary in order to use the product as a transport seat in a vehicle for transporting persons
with reduced mobility (tested according to ISO 10542-1 or comparable test standards). The qualified personnel
who fitted the wheelchair can provide more information.
Required materials
•
4 belt loops (e.g. from Unwin Safety Systems, Q'Straint)
36
65
Avantgarde 4
Advertisement
Table of Contents
