Serial Communications Ports - Powerware Plus 80 Operation

The RIM can provide these signats:
UPS AVAIlABLE (connector pins 1 and 12)
Relay 1 is energized and the UPS is operating in Normal mode.
UPS OFF UNE (connector pins 3 and 13)
Relay 1 is not energized. indicating that the UPS is not operating in Normal mode. This
signal is the opposite of UPS Available.
Relay 2 is energized. The UPS is on battery and the
available.
BATTERY WEAK (connector pins 5 and 14)
I
Relay 3 is energized, indicating that shutdown is imminent. The UPS has approximately 2
minutes of battery time remaining until it will no longer support the critical load.
I

Serial Communications Ports

I
Two serial communications potis are provided on the UPS. You can connect these ports
to a remote terminal and/or printer to
screen of the UPS Monitor Panel. For detailed information about
capabilities of this UPS, sea Powwnww Plus SOS& Communications Guide.
I
I
I
I
I
I
I
36
I
Powerware plus 66 UPS Operator's