Monitoring And Controlling Ups Operation - Powerware Plus 80 Operation

Monitoring and Controlling UPS Operation

After you star-l the UPS, no operator intervention is necessary except for periodic checks of
the UPS status. Manual operation is required only during routine maintenance or
You use the Monitor Panel and the Control Panel to monitor and control the UPS. Figure
shows the location of these two panels on the front of the UPS.
I
I
I
I
I
I
I
I
I
I
I
UPS operation. This panel contains an LCD screen, backlit status indicators, and the Load
or a graphic representatfon
'Using me Monitor Panel' on page 19.
When you open me right front door ot the UPS. you can see the Corrtml
change me UPS mode manually. The Contrcd Panel is dii in the following chapter.
I
CONTROL PANEL
\
of UPS operation. The Monitor Panel is described in detail in
Panel to view performance meten
1 3