Using The Pushbuttons; Using The Load Off Button - Powerware Plus 80 Operation

You can use the LCD screen and the pushbuttons beneath it to:
Monitor UPS operation
l
Look at a log of UPS events (alamvs, notices, and commands)
l
Use the pushbuttons to adjust the contrast on the LCD screen. Hold down the
pushbutton, then press the 0 pushbutton to increase the contrast or the
decrease the contrast.

Using the Pushbuttons

The pushbutfons
Press the 0 and 9 pushbuttons to move among the options in a menu, or to scroll
l
through the list of atarms and notices in the event log.
Press the a and 0 pushbuttons to move among the menu, titles on the menu bar.
l
Press them simultaneously to silence the horn, or to teat the lamps behind the status
indicators.
Press the W pushbutton to toggle the usa of the 0 and 0 pushbuttons between the
l
menu box and the infonnatlon
pushbuttons to adjust screen
The Load ofl butfort is red and covered by a clear plasticshield.
can press this button to cut off uttlii power to the power processing unit of the UPS and to
your crfttcat load. Par more information, sae "Using the Load Off Sutton' on page 51.
Power-ware Plus 80 UPS Operator's Manual
below the LCD screen are labeled with anows
area. Hold the @ pushbutton and press the 0 and 0
indicating their functions:
In an emergency, you
YOU PRESS
WHEN
2 1