Printing S8Lected Information; Entire Log (Ctrl + P) - Powerware Plus 80 Operation

Printing Selected Information
If a port is operating in Terminal mode and is connected to a computer, you can use key
combinations at any time to print only Sekcted information:
To
I

Entire Log (Ctrl + P)

This key sequence prints the entire Event History Log of the UPS at the time the data is
requested. The printout begins with the oldest alarm entry in the queue and ends with the
I
most recent. Any alarms that occur while the Event History Log is printing are included in
chronological
I
The Event History Log lists up to 400 system events in chronological order, with the most
recent event listed last. Figure 5 shows a sample Event History
I
I
I
I
I
I
I
I
1 0
Prints the entire log with a header
Prints the current system meters with a header
Prints all system information
a key combination, hold down the Control key and press the letter key.
order.
Uninterruptible Power System
supplying Load
U P S
Alarm:
Notice:
Event History Log
MAY 12 16:41:05.5
12 16:41:05.5
12 16:41:29.1
12 16:43:15.7
12 16:43:15.8
12 16:43:42.4
12 16:43:46.8
12 16:44:29.1
04 13:37:26.4
04 13:45:43.6
04 13:53:26.8
18 02:05:12.5
18 02:09:55.3
03 JAN 1994 14:22:49
Event Description
COMMAND: Start Switch
STATUS: On Bypass, Auto Mode
STATUS:
System No?n~.l
COMMAND:
Mode Switch to Manual Bypas
STATUS:
On Manual ByPa-
Mode Switch to Normal
Start switch
STATUS:
System Normal
NOTICE:
Room High Temperature
ALARM:
ALARM:
Cleared, Over Temp
NOTICE:
Room Temperature OK
NOTICE:
Charger Voltage Under Limit
STATUS: System Normal. On Battery
NOTICE:
NOTICE:
Charger Voltage in Limits
Normal
Imminent
Plus 80 UPS Communication