Important Safety Instructions - Powerware Plus 80 Operation

This chapter describes how to install the UPS manufacturer's battery This chapter describes how to install the UPS manufacturer's battery
cabinets. Two models are available, one in a 610 mm wide cabinet and one cabinets. Two models are available, one in a 610 mm wide cabinet and one
in a 616 mm wide cabinet (referred to in this chapter as the Type 1 baffery and the in a 616 mm wide cabinet (referred to in this chapter as the Type 1 baffery and the
Safety Instructions
Important
The installation of battery cabinets should be performed or supervised by
personnel knowledgeable of batteries and their associated precautions. Keep
unauthorized personnel away from battery cabinets.
Observe these precautions when working on or around battery cabinets:
Remove watches, rings, or other metal objects.
l
Use tools wlth insulated handles.
l
Wear rubber gloves and boots.
l
00 not lay tools or metal parts on top of batteries or battery cabinets.
l
Disconnect the charging source prior to connecting or disconnecting
l
terminals.
Determine if the battery is inadvertentfy grounded. If it is, remove the
l
source of the ground. Contact with any part of a grounded battery can
result in electrical shock. The likelihood of such shock will be reduced if
such grounds are removed during installation and maintenance.
batteries.
Proper disposal of batteries is required. Refer to your local codes for
l
disposal requirements.
CAUTION:
: 00 not dispose of battery or batterfee in a fire. The battery may
CAUTION:
00 not open or mutilate the battery or batteries.
CAUTION:
Released
27