Powerware Plus 80 Operation page 33

Select Port 1 or Port 2 from the Setup menu to display one of the Poti Setup screens. The
Port Setup scmens allow you to specify settings for me two serial communication ports on
the UPS. Figure 17 shows me Setup Serial Port 1 screen.
This arrow is a reminder mat you can press me e pushbutton on me Monitor Panel to
toggle me pushbuttons between me menu box and me information area. When me scroll
bar is in me information - the return arrow is in the menu box. When me scroll bar is in
menu box, me return armw is in me information area
When me scroll bar appears in me information area. you can "se me pushbuttons to
change me pori comIguration.
move the hiihllghl to the setting you wanl to change. To scroll through me availabte
options for mat setting, press me 0 or
The setup screens for Port 1 and Port 2 are identical. For detailed information about
configuring the serial ports, see PowwmareC Plus 80 Setial Communications Guide.
To change a setting, press me 0 and 0 pushbuttons to
V
pushbutton. To save me settings upon exit from