To Shut Down The Ups From Normal Mode - Powerware Plus 80 Operation

1.
I
2. When the transfer is complete (the LCD screen reads "On Bypass"), move the
I
I
I
To start the UPS in Bvnass mode:
If the power processing unit (PPU) of the UPS is not avatlabks and you need to energize
I
your critical load right away, you can energtze your critical load without the benekt of
backup. To turn the UPS on in Bypass mode:
1.
2. Turn the keyswftch to the tight momentarify.
I
I
I
To shut down wwer to the critical load while in Bvoass mode:
To perfon maintenance or service on your critical load. you must shut tt down first:
I
1.
I
I
I
I
The power processor shuts down without de-energizing the critical load, and the UPS
switches to Bypass mode. If the bypass source is not available, the power processor
remains on and an alamt sounds.
The bypass source supplies the critical load. and the power processor turns off. The
Bypass mode indicator lights on the
position.)
Power to the crtttcal load is supplied by the bypass source. No backup is available.
Plus 80 UPS Operator's Manual
Panel.
1 7