Remote Monitor Panel - Powerware Plus 80 Operation

Remote Monitor Panel

As an option, you can install one or more Remote Monitor Panels
operation of the UPS system from virtually any location within your facility, up
from the UPS. Each RMP contains backlit status indicators and a local horn.
flush mount or surface mount an RMP on a desktop or on a
serial interface line. Figure 20 shows an
Afler you install an RMR fi the communications link between the UPS and the RMP is not
present, the RMP will setf-teat (all indicators Rash and the horn beeps at one-second
intervals). lf this occurs, check all harness connectors and the fuse for proper seating. if
all connecttons are secure but the RMP continues to
spare included in the hardware kit. If this does not correct the problem, contact your local
field service offfce for verification that the RMP is working correctly.
To test the indicator lamps, press the horn silence button end hold it for 3 seconds. All
lamps should light, and the horn will sound continuously until you release the button.
Plus 30 UPS Operator's Manual
replace the fuse wtth the
3 3