Powerware Plus 80 Operation page 130

DE-9 CONNECTOR
(ON COMMUNICATIONS
PANEL OF THE UPS)
4. Connect the RMP wiring to the terminal block using the terminations shown in
Table J on page 55.
TWISTED WIRES (4)
l-2 TURNS PER
l-2 TURNS PER
inverter or bypass. If the indicators on the RMP show the appropriate status.
then ti is operating correctly.
If the communications link between the UPS and the RMP is not present, the
RMP will self-test (all indicators flash and the horn beeps at onesecond