2 Preparing and operating the CM-30S
15. Ensure the tubing or eCord fob cable does not interfere with the latch
mechanism, and then close the column-compartment drawer while
pushing down on the handle, to secure the latch.
Drawer handle
16. Close the outer door of the CM-30S.
Installing and removing a single column on the column
plate
Required materials
•
Column
•
Column plate
•
Column support clips
•
Gloves: clean, powder-free, chemical-resistant
To install a single column on the column plate:
1.
Select the correct column support clip for the column.
54
October 7, 2014, 715004178 Rev. B