Table of Contents
Advertisement
3.
Connect the HPE APM module to the power shelf (shown in
blue).
Connecting power cables and
applying power to the chassis
1.
Connect the DC power cable to the power shelf.
2.
Connect the AC power cables to the power source (UPS or wall
outlet) or to an installed PDU.
Configuring the chassis
For more information on setting up and configuring your system, see
the HPE Apollo a6000 Chassis Setup and Installation Guide.
Troubleshooting resources
The HPE ProLiant Gen9 Troubleshooting Guide, Volume I:
Troubleshooting provides procedures for resolving common
problems and comprehensive courses of action for fault isolation and
identification, issue resolution, and software maintenance on
ProLiant servers and server blades. The ProLiant Gen9
Troubleshooting Guide, Volume II: Error Messages provides a list of
error messages and information to assist with interpreting and
resolving error messages on ProLiant servers and server blades.
The documents are on the Hewlett Packard Enterprise website
(http://www.hpe.com/support/proliantgen9/docs).
The installation is complete.
For more information
For more detailed setup and configuration information, see the
Advanced Power Manager User Guide. For safety information and
regulatory notices, see the relevant section of the product user guide
on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/docs).
Documentation feedback
Hewlett Packard Enterprise is committed to providing documentation
that meets your needs. To help us improve the documentation, send
any errors, suggestions, or comments to Documentation Feedback
(mailto:docsfeedback@hpe.com). When submitting your
feedback, include the document title, part number, edition, and
publication date located on the front cover of the document. For
online help content, include the product name, product version, help
edition, and publication date located on the legal notices page.
Advertisement
Table of Contents
