Device Bay Numbering - HPE Synergy 12000 Frame Setup And Installation Manual

Item
1
2
3

Device bay numbering

All device bays in the frame are numbered in consecutive order from lowest to highest, from left to right
from top to bottom, as observed by a user looking directly at the frame.
Devices larger than half-height (multi-bay devices) are numbered according to the lowest device bay
number that the multi-bay device occupies.
For an even number of device modules, they must be installed next to each other between sets of vertical
partitions if all device bays in the frame are to be used.
For an odd number of single-wide full-height device modules, an even number must be installed next to
each other between each vertical partition, and the odd module must be installed in device bay 2 if all
device bays in the frame are to be used.
The device bay numbering is available on the Information pull tabs.
Device bay type
Single-wide, full-height
Single-wide, half-height
Single-wide, mixed-height
Double-wide, full-height
Double-wide, half-height
Double-wide, mixed-height
Description
Device bays—Compute modules and storage modules
Front panel—Provides access to the HPE Synergy console, via KVM or laptop.
Appliance bays
Device bay numbering
Device bay numbering 15