Creating A Password To Your Call Log; Changing Your Call Log Password; Deleting An Assigned Password - Nortel Enterprise Edge 2.0 Manual

70 Tracking your incoming calls
6. Lift the receiver. (Not necessary if Handsfree is programmed at your
telephone.) The displayed number dials.

Creating a password to your Call Log

Ä¥¡Þ
To access your Call Log through a password:
Ä¥¡Þ
1. Press
2. Enter your four-digit password. The display reads
3. Re-enter your four-digit password. The display reads
confirms the assignment of a password by the system.
To enter Call Log using a password:
Ä¡ÚÛ
1. Press
password, the display reads
2. Enter your four-digit password.
If you do not remember your Call Log password, programming from the Unified
Manager can delete the password. For more information about programming using
the Unified Manager, see the Enterprise Edge 2.0 Programming Operations Guide.

Changing your Call Log password

Ä¥¡Þ
Ä¥¡Þ
1. Press
2. Enter your old password. The display reads
3. Enter your new four-digit password. The display reads
4. Re-enter your password. The display reads
the change of your password in the system.

Deleting an assigned password

Ä¥¡Þ
Ä¥¡Þ
1. Press
2. Enter your old password. The display reads
Enterprise Edge 2.0 Feature Programming Telephone Guide
New passwrd:
. The displays reads
to enter Call Log. If you have programmed a
Password:
.
Old passwrd:
. The display reads
New passwrd:
Password changed
Old passwrd:
. The display reads
New passwrd:
.
Repeat New:
.
Password changed
, which
.
.
Repeat New:
.
, which confirms
.
.
P0911589 Issue 03