Preface; Studio 5000 Environment - Rockwell Automation Allen-Bradley POINT Guard User Manual

Studio 5000 Environment

Thoroughly read and understand this manual before installing and operating a
system using POINT Guard I/O™ modules.
Always observe the following guidelines when using a module, noting that in this
manual we use safety administrator to mean a person qualified, authorized, and
responsible to secure safety in the design, installation, operation, maintenance,
and disposal of the 'machine' .
• Keep this manual in a safe place where personnel can refer to it when
necessary.
• Use the module properly according to the installation environment,
performance ratings, and functions of the machine.
See Understand Suitability for Use on page 15
page 17.
Product specifications and accessories can change at any time. Consult with your
Rockwell Automation representative to confirm specifications of purchased
product. Dimensions and weights are nominal and are not for manufacturing
purposes, even when tolerances are shown.
Consult your Rockwell Automation representative if you have any questions or
comments. Also refer to the related documentation, listed in the
necessary.
The Studio 5000® Automation Engineering & Design Environment combines
engineering and design elements into a common environment. The first element
is the Studio 5000 Logix Designer™ application. The Logix Designer application
is the rebranding of RSLogix™ 5000 software and will continue to be the product
to program Logix5000™ controllers for discrete, process, batch, motion, safety,
and drive-based solutions.
The Studio 5000 environment is the foundation for the future of Rockwell
Automation® engineering design tools and capabilities. The Studio 5000
environment is the one place for design engineers to develop all of the elements of
their control system.
Rockwell Automation Publication 1734-UM013J-EN-P - July 2014

Preface

and Safety Precautions on
page 13, as
11