Preface; Summary Of Changes; Manual Conventions - Rockwell Automation Allen-Bradley FLEX 5000 User Manual

Summary of Changes

Manual Conventions

This manual describes how to use FLEX 5000™ standard and safety I/O
modules in Logix 5000™ control systems.
Make sure that you are familiar with the following:
• Use of a controller in a Logix 5000 control system
• Use of an EtherNet/IP™ network, if the digital I/O modules are installed
in a remote location from the controller that is accessible via the
EtherNet/IP network
• Use of safety systems
• Studio 5000 Logix Designer® environment
This manual was revised to add information about FLEX 5000 I/O safety
modules. This table indicates where new content exists in the manual.
Topic
Added safety catalog numbers 5094-IB16S, 5094-IB16SXT, 5094-OB16S, 5094-OB16SXT
Added Chapter 5, Safety I/O Module Features
Added Chapter 7, Configure and Replace Safety Modules
Added Appendix C, Application/Wiring Examples for Safety I/O Modules
Added Appendix D, Safety Data for I/O Modules
Within this manual, we simplified product names and added product icons for
your ease of use.
We use standard module to indicate a module that does not have functional
safety capability. We use safety module to indicate a module with functional
safety capability (catalog numbers ending in "S" or "SXT"). Further, we use
FLEX 5000 I/O module to indicate when a concept or task applies to both the
standard and safety digital I/O modules.
Rockwell Automation Publication 5094-UM001C-EN-P - April 2019

Preface

Page
Throughout
71
107
155
163
9