Switching Logo! On/Resumption Of Power Supply - Siemens LOGO! 24RC Manual

Installing and Wiring LOGO!
2.3 Switching LOGO! On/Resumption of
Power Supply
LOGO! does not have a power switch. How LOGO! re-
sponds when switched on, depends on the following:
Whether a program is stored in LOGO!.
Whether a program module is connected.
Whether it is a LOGO! variant without a display
(LOGO!...RCo).
The state LOGO! was in before power off.
The table indicates LOGO!'s response to the possible situ-
ations:
Before power off
No Program
No program in
memory
I:123456
Mo 09:00
B03:Par
Par = 0300
Q:1234 RUN
Cnt = 0028
LOGO! in RUN
&
Program in
memory
24
or
(empty)
(with program)
or
(empty)
(with program)
B01
or
Q1
(empty)
(with program)
After power on
No Program
>Program..
PC/Card..
Start
With stored pro-
I:123456
gram from
Mo 09:00
LOGO!
Q:1234 RUN
With program
I:123456
copied from
Mo 09:00
module to
Q:1234 RUN
LOGO!
With stored pro-
>Program..
PC/Card..
gram from
Start
LOGO!
With program
>Program..
PC/Card..
copied from mod-
Start
ule to LOGO!
LOGO! Manual
A5E00067781 01