Introduction; Who Should Read This Manual - Qualstar RLS-8350 Technical & Service Manual

1.

1.1 Who Should Read This Manual

This Technical Service Manual is for RLS service personnel. It describes the Mainte-
nance Menu, the Private Menu and instructions for removing and replacing Field Re-
placement Units (FRU's). It also contains troubleshooting procedures and after–
maintenance testing procedures.
The following topics are covered in the RLS-8350/85XX Series Tape Library Installa-
tion and Operation manual (Qualstar document number 511000):
Unpacking Instructions
•
Operator Interface
•
System Configuration
•
System Operation
•
Preventative Maintenance
•
Repacking Instructions
•
For information about the SCSI interface, or other information outside the scope of
this manual, please refer to the appropriate documents listed below.
Subject
Specifications
Specifications
Installation and Operation
Approved Data Cartridges
Barcode Label Specifications
SCSI Medium-changer Information
SCSI-2 Specification
SCSI SPI-3 Specification
SCSI-1
SCSI-2
SCSI Parallel Interface-2 Specification (SPI-2)
511010 Rev. 07-01-19
Document
RLS-8500 Tape Library Product
Specification
RLS-8350 Tape Library Product
Specification
RLS-8350/85XX Series Tape Li-
brary Installation and Operation
Manual
Product Information Note
Product Information Note
RLS SCSI-2 Interface Reference
ANSI X3.131-1994
NCITS T10 Project 1302D
ANSI X3.131-1986
ANSI X3.131-1994
ANSI X3.302-1998

Introduction

Introduction
Qualstar
Documen
Number
511001
511002
511000
PIN-038
PIN-040
501551
N/A
N/A
N/A
N/A
N/A
t
1-1