Fastpass Elevator Assembly Replacement - Qualstar RLS-8350 Technical & Service Manual

7.16.2 FastPass Elevator Assembly Replacement

This procedure assumes that the FastPass Elevator Assembly was removed in Section
7.16.1.
Carefully slide the upper elevator expansion module into the upper library as
1.
shown in Figure 7-33. Make sure that the elevator mechanism is in its upward
position so that it does not interfere with anything inside the library as it is slid
in. See Figure 7-32.
Elevator Mechanism shown in
It's upward position.
Figure 7-32 Upper Elevator Mechanism
Elevator Mechanism in
It's upward position.
511010 Rev. 07-01-19
Do not attempt to install or remove an Elevator
Upper Elevator Expansion Module
Field–Replaceable Units (FRUs)
Mechanism in this position.
7-35