Private/Display Location Page - Qualstar RLS-8350 Technical & Service Manual

5.6 Private/Display Location Page

The Private/Display Location page contains data from the library's internal inventory
database. The data in this page differs from the data found in the Operation/Element
Status page, because it does not contain references to SCSI element addresses.
Simply touch an element to select it and all the internal database information for that
location will be displayed.
Figure 5-20 The Private/Display Location Page
Field Option
Partition 1, 2, 3, 4, 5, 6, 7
Location
Type Slot, Drive, Han-
dler, IO Port
Accessible Yes or No
Accessible Yes or No
Valid
Occupied Yes or No
Occupied Yes or No
Valid
Present Yes or No
Present Valid Yes or No
Source Valid Yes or No
Label Valid Yes or No
Label
Table 5-14 Private/Display Location Description
511010 Rev. 07-01-19
The number of the partition where the element is assigned.
The physical location of the element.
The type of element; Slot, Drive, Handler or IO Port.
A Yes value indicates that a tape drive is empty or unloaded and acces-
sible to the changer. A No value indicates that a tape drive is loaded and
not accessible to the changer.
A Yes value means the Accessible status for the selected tape drive is
valid.
A Yes value indicates that a cartridge occupies the selected location.
A Yes value means the Occupied status for the selected location is valid.
A Yes value indicates that a drive or other device is present at the select-
ed location.
A Yes value means the Present status for the selected location is valid.
A Yes value means the Source Location data for the selected location is
valid.
A Yes value indicates the RLS attempted to read the barcode label.
The value read from the barcode label attached to the tape cartridge.
The Private
Description
5-23