Qualstar RLS-8350 Technical & Service Manual page 98

Carefully slide the lower elevator expansion unit out from the lower library.
5.
It is important to visually confirm that the elevator mechanism is in its upper
position before attempting to remove the upper elevator module from the li-
brary. Damage to the module can occur if the elevator is in its lower position
when it is being removed.
Look through the opening where the lower elevator expansion unit was removed
6.
and confirm that the elevator mechanism is in its upper position as shown in
Figure 7-31. If it is not in this position, reach into the library and push it up-
wards until it is completely in the upper position.
Elevator Mechanism in
It's upward position.
Figure 7-31 The Elevator Mechanism in its Upper Position
Carefully slide the upper elevator expansion unit out from the lower library.
7.
7-34
CAUTION
Field–Replaceable Units (FRUs)
511010 Rev. 07-01-19