Qualstar RLS-8350 Technical & Service Manual page 5

tify the process for recycling the materials and components that make up a Qualstar
tape library.
Tools required
P1 and P2 Phillips head screwdrivers
•
T20 Torx head screwdriver
•
Hex head (Allen) wrench/driver set
•
1/4-inch hex nut driver
•
Disassembly procedure
Remove magazine.
1.
Remove center panel.
2.
Remove rear panels and PCBA's.
3.
Remove internal subassemblies.
4.
Items recyclable using conventional methods
Aluminum: Robotics
•
Stainless steel: Robot guides
•
Steel: Exterior panels, some frames, fasteners
•
Plastic: Window, cartridge magazines, tape cassettes, exterior front
•
Copper: Internal wiring, motors
•
Paper: Manuals
•
Items that may have salvage or resale value
Tape drives
•
EMI line power filter
•
Qualstar is committed to the implementation of RoHS (Restriction of the use of cer-
tain hazardous substances in electrical and electronic equipment) in accordance with
the European Directive. The effectivity date for compliance is July 1, 2006, at which
time Qualstar will certify that its Tape Library products are compliant with the RoHS
511010 Rev. 07-01-19
End of Life Instructions
Reduction of Hazardous Substances (RoHS)
iii