Figure 4-12 Home Page during Demonstrations
On the Home page during demonstrations the handler may be parked by using the
quick command buttons on the Home page. If the option to enable I/O Port operation
was selected, the Open IO buttons will be active, otherwise they will be gray and inac-
tive.
To exit demonstration mode a magazine (storage matrix) must be unlocked.
4.5.2 Random Moves
Touching the Start button under Random Moves commands the changer to start a
continuous sequence of random cartridge moves. These moves will continue until the
same button, now named Stop is touched.
4-8
NOTE
The Maintenance Menu
511010 Rev. 07-01-19