Qualstar RLS-8350 Technical & Service Manual page 84

Use a Number 2 Phillips screwdriver to remove the two screws (one on each
4.
side) that secure the library to the front rack posts. See Figure 7-15.
Remove both screws to release
Figure 7-15 Removing the screws that secure the Library to the Rack
Slide the library out on the rack rails until about 8 inches is sticking out the
5.
front of the rack posts.
7-20
the library from the rack
Field–Replaceable Units (FRUs)
Flange
511010 Rev. 07-01-19