Qualstar RLS-8350 Technical & Service Manual page 105

There are two ways to clear the password, the first involves pressing the Securi-
9.
ty Id: on the Home Screen, which will bring up a screen stating "Select Ok to re-
set the Security ID to the default setting." See Figure 7-41.
Figure 7-41 Security ID on the Home Screen
Pressing the Ok button will set the Security Identity to its default, which is
10.
None and the Security ID: will disappear from the Home Screen.
The alternate procedure is to return to the Configuration/Library/Identification
11.
and Security screen then press the Edit button as was done when originally en-
tering the Update password. When the screen appears for entering passwords,
do not enter any characters. Simply press the done button and then the Save
button on the Configuration/Library/Identification and Security screen, which
will leave the Security Identity as None.
511010 Rev. 07-01-19
Field–Replaceable Units (FRUs) 7-41