Qualstar RLS-8350 Technical & Service Manual page 41

Figure 5-3 Screen for entering passwords
Service is the password used by qualified service personnel to access certain Pri-
•
vate screen items while servicing the RLS. Please note that only the first letter is
capitalized.
Update is the password used by qualified service personnel to access other Private
•
screen items while upgrading a RLS. Please note that only the first letter is capital-
ized.
Note that changes to the screen will not be saved until the Save button is pressed.
Pressing the Cancel button will remove all of the current editing and revert to the last
saved version of the screen. The new password will not take effect until the Save but-
ton is pressed on the Configuration/Library/Identification and Security screen as
shown in Figure 5-4.
Figure 5-4 Cancel and Save buttons
The current password should always be cleared (removed) after the user finishes ser-
vicing a unit to prevent unauthorized access to the private screens.
511010 Rev. 07-01-19
The Private 5-3