Qualstar RLS-8350 Technical & Service Manual page 85

The front hand holds must be installed on the library before it can be slid all the
6.
way out of the rack. Please contact Qualstar Technical Support for a replace-
ment set if the front hand holds that originally shipped with the RLS cannot be
located. Use a Number 2 Phillips screwdriver to install the two screws that se-
cure the hand holds to the left and right sides of the RLS.
Install these 2 Screws to
secure a Hand Hold
Figure 7-16 Installing the Front Hand Holds on the Library
511010 Rev. 07-01-19
Field–Replaceable Units (FRUs)
Front
Hand Hold
7-21