Qualstar RLS-8350 Technical & Service Manual page 60

Section
Host Interface
Drive WWNN
Primary Port
Primary Interface
Rate
Primary WWPN
Secondary Port
Secondary Interface
Rate
Secondary WWPN
Drive 1 to 7 Enabled
Supplies
Fault
Valid
Supply 12 (mV)
Supply 5 (mV)
Environment Fan Fault
Environment 24 (mV)
Limit
Environment 24 (mV)
Environment 5 (mV)
Environment TempTc
Table 5-13 Display Drive Screen Information
5-22
Field
The type of connection the host has made to
the library through the tape drive's interface.
The World Wide Node Name assigned to the
tape drive.
This will be the port for tape drives with a single
port and this will be the first connection for dual
port tape drives.
The speed of the connection from the host
through the tape drive's interface in Gigabytes
per second. This will be the speed for tape
drives with a single port and this will be the first
for dual port tape drives.
The World Wide Port Name assigned to tape
drives with a single port and this will be the first
connection for dual port tape drives.
Tape drives that have two ports can have the
second port connected.
The speed of the connection from the host
through the tape drive's interface in Gigabytes
per second. Some tape drives have two ports
and if the second port is connected its speed
will be shown here.
Some tape drives have two ports and if the
second port is connected its assigned WWPN
will be shown here.
Whether or not the tape drive is enabled.
Is the tape drive functioning properly?
Indicates whether or not the library considers
the information in this field to be valid or not.
This value displays the 12V supply voltage on
the tape drive in millivolts.
This value displays the 5V supply voltage on
the tape drive in millivolts.
Is the fan in the tape drive carrier functioning
properly?
This value displays the 24V supply voltage on
the Backplane PCBA in millivolts.
This value displays the 24V supply voltage on
the drive carriers PCBA in millivolts.
This value displays the 5V supply voltage on
the drive carriers PCBA in millivolts.
The temperature inside the Drive Carrier.
The Private
Description Option
FC or SAS
Variable
Yes or No
Variable
Variable
Yes or No
Variable
Variable
–
Yes or No
Yes or No
–
–
Yes or No
–
–
–
Tenths of
a degree
Celsius
511010 Rev. 07-01-19