Storage Matrix Assembly Blank; Removing A Storage Matrix Assembly Blank - Qualstar RLS-8350 Technical & Service Manual

Fold the handle down 90 degrees so it will clear the libraries frame and continue
4.
to slide it all the way into the library.
Lock the storage matrix with the key.
5.

7.6 Storage Matrix Assembly Blank

P/N 510753-10-6
Storage Matrix Assembly Blanks are installed on RLS-8560 models, which only have
the left side storage matrix. The Storage Matrix Assembly Blank will need to be re-
moved when upgrading to a right side storage matrix.
Tools Required:
No. 2 Phillips Screwdriver
•
Flashlight (optional)
•
Small Mirror (optional)
•

7.6.1 Removing a Storage Matrix Assembly Blank

Remove power from the RLS by first pressing the power switch off and then re-
1.
moving the power cord (two power cords if dual-redundant power supply mod-
ules are installed).
Remove the left side storage matrix as described in Section 7.5.1.
2.
The Storage Matrix Assembly Blank is secured to the RLS with two captive
3.
screws, which can be reached by inserting a hand through the opening created
by removing the left side storage matrix.
Figure 7-3 Storage Matrix Assembly Blank on front of RLS with Left Side Storage Matrix Re-
moved
7-6
RLS-85XX
User Interface Panel Assembly
Left Side Storage Matrix Removed
Field–Replaceable Units (FRUs)
Storage Matrix
Assembly
Blank
511010 Rev. 07-01-19