Removing The 2U Chassis Top Cover - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

Removing the 2U chassis top cover

To remove the 2U chassis top cover, complete the following steps.
Top cover
1. Read the safety information that begins on page vii and "Installation guidelines"
2. If the chassis is installed in an iDataPlex rack, remove it (see "Removing the 2U
3. Press the two cover-release buttons and slide the cover toward the rear of the
4. If you are instructed to return the 2U chassis top cover, follow all packaging
82
System x iDataPlex dx340 Types 6385, 6386, 6389, 7831, 7832, and 7834: Problem Determination and Service Guide
Release buttons
on page 71.
chassis from a Type 7825 iDataPlex rack" on page 123).
chassis to remove it.
instructions, and use any packaging materials for shipping that are supplied to
you.