Installing The 2U Chassis Power Supply - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

Installing the 2U chassis power supply

To install the power supply in a 2U chassis, complete the following steps.
1. Touch the static-protective package that contains the power supply to any
2. Insert the power supply into the front of the chassis.
3. Carefully guide the power supply into the guides at the left-rear corner of the
4. Install the fan assembly (see "Installing the 2U chassis fan assembly" on page
5. Install the top cover (see "Installing the 2U chassis top cover" on page 83).
6. Install the chassis in the iDataPlex rack (see "Installing the 2U chassis in a Type
Power supply
unpainted metal surface on the outside of the chassis; then, remove the power
supply from the package.
chassis until the release latch clicks into place.
81).
7825 iDataPlex rack" on page 124).
Power supply
Release
latch
Chapter 4. Removing and replacing server components
95