Installing A Pcie Riser-Card Assembly In The System-Board Tray - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

Installing a PCIe riser-card assembly in the system-board tray

To install a PCIe riser-card assembly in the system-board tray, complete the
following steps.
1. Touch the static-protective package that contains the PCIe riser-card assembly
2. Install the PCIe adapter, if you removed one (see "Installing an adapter in the
3. Press the PCIe riser-card assembly into the riser-card slot on the system board.
4. Install the retaining screw.
5. Install the storage enclosure, if you removed one (see "Installing an expansion
6. Install the system-board tray in the chassis (see "Installing the system-board
116
System x iDataPlex dx340 Types 6385, 6386, 6389, 7831, 7832, and 7834: Problem Determination and Service Guide
One-slot riser card assembly
to any unpainted metal surface on the outside of the system-board tray; then,
remove the PCIe riser-card assembly from the package.
system-board tray" on page 101).
enclosure on a system-board tray" on page 74); otherwise, install the
system-board tray cover (see "Installing the system-board tray cover" on page
122).
tray in a 2U chassis" on page 76 or "Installing the system-board tray in a 3U
chassis" on page 78).
PCIe adapter
System-board tray
Riser-card assembly connector