Installing The Power Cord - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

Installing the power cord

To install the power cord, complete the following steps.
1. Grasp the end of the power cord with the plug mount molded onto it in your
2. Align the mounting posts on the mounting plate with the slots in the plug mount
3. Position the entire assembly inside the left rail and align the mounting posts with
4. Install the power cord and mounting plate.
5. Plug the power cord that you are working on into a PDU.
6. Install the chassis in the iDataPlex rack (see "Installing the 2U chassis in a Type
Mounting
plate
Mounting
post
right hand. Notice the shape of the plug and how it matches the cutout in the
mounting plate.
and install the power cord onto the mounting plate.
the holes in the back of the mounting bracket on the rail.
7825 iDataPlex rack" on page 124) or ("Installing a 3U chassis in a Type 7825
iDataPlex rack" on page 130).
Plug
mount
Power
cord mounting
bracket
M3
screws
Power
cord
Chapter 4. Removing and replacing server components
93