I/O Enclosures Configured With 3.5-Inch Simple-Swap Hard Disk Drives - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

I/O enclosures configured with 3.5-inch simple-swap hard disk drives

The following replaceable components are available for I/O enclosures that are
configured with 3.5-inch simple-swap hard disk drives.
Table 5. CRUs and FRUs, I/O enclosures configured with 3.5-inch simple-swap hard disk drives
Index Description
1 Power-supply paddle card domain B
2 I/O enclosure
3 PCIe adapter
4 PCIe adapter bay cover
5 Two-slot PCIe riser-card assembly (2x4 with 2x16 connectors)
6 2x2 2.5-inch drive filler panel
7 3.5-inch drive filler panel
SATA hard disk drive (see Table 2 on page 61 for the supported
8
drives)
SAS hard disk drive (see Table 2 on page 61 for the supported
9
drives)
10 One-bay hard disk drive bracket and cable assembly, SATA 1x
11 One-bay hard disk drive bracket and cable assembly, SAS 1x
CRU part CRU part
number number
(Tier 1) (Tier 2)
39Y7311
44W4859
44W4801
44W4802
44T0647
44T0676
Chapter 3. Parts listing
FRU part
number
44W4799
44X0449
67