Installing An I C Multiplexer Card - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

2
Installing an I C multiplexer card
To install an I
1. Touch the static-protective package that contains the I
2. Slide the I
3. Install the retaining screws.
4. Reconnect the cables to the I
5. Install the I/O enclosure (see "Installing an expansion enclosure on a
6. Install the system-board tray in the chassis (see "Installing the system-board
2
C multiplexer card in the I/O enclosure, complete the following steps.
unpainted metal surface on the outside of the I/O enclosure; then, remove the
2
I C multiplexer card from the package.
2
C multiplexer card under the mounting clips.
system-board tray" on page 74).
tray in a 2U chassis" on page 76).
2
C multiplexer card.
Chapter 4. Removing and replacing server components
2
C multiplexer card to any
105