Installing A Storage Enclosure - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

Installing a storage enclosure

To install a storage enclosure, complete the following steps.
1. Carefully set the storage enclosure on a flat, static-protective surface.
2. Install the hard disk drive bracket and cable assembly (see "Removing and
3. Install the hard disk drives in the storage enclosure (see "Removing and
4. Install the storage enclosure on the system-board tray (see "Installing an
120
System x iDataPlex dx340 Types 6385, 6386, 6389, 7831, 7832, and 7834: Problem Determination and Service Guide
installing a one-bay or four-bay hard disk drive bracket and cable assembly" on
page 108).
installing a hard disk drive" on page 88).
expansion enclosure on a system-board tray" on page 74).