Installing The 3U Chassis Top Cover - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

Installing the 3U chassis top cover

To install the 3U chassis top cover, complete the following steps.
1. Make sure that no wires are protruding and might interfere with the cover.
2. Orient the cover over the rear of the chassis so that the retention tabs on the
3. Slide the cover onto the chassis until the cover-release buttons click into place.
4. Install the chassis in the iDataPlex rack (see "Installing a 3U chassis in a Type
cover align with the tabs in the chassis.
7825 iDataPlex rack" on page 130).
Chapter 4. Removing and replacing server components
85