Selecting The Exposure Parameters - Sirona Orthophos XG Plus DS/Ceph Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions ORTHOPHOS XG
9.7

Selecting the exposure parameters

PAN
CEPH
1260
P1
SID = 19,6" SID = 19,6"
10 9,0 s 9,0 s
6 x 12" 6 x 12"
Quick
Ready for exposure Ready for exposure
PAN PAN
CEPH
1260
P1
10
14,1s
62kV
8mA
Ready for exposure
59 87 594 D 3352
D 3352.201.01.18.02
Plus
DS/Ceph
TS
64kV
8mA
?
TS
64kV
8mA
AEC
?
The patient symbol keys are factory-programmed with
kV/mA combinations:
• Select the exposure parameters by touching one of
the four patient symbols.
The selected patient symbol is highlighted in orange
and the corresponding kV/mA value is displayed in
column (8) next to the patient symbols.
8
Modifying the exposure parameters manually
If the default kV/mA combinations do not provide satis-
factory results, you can preselect intermediate kV/mA
values in the kV/mA submenu.
To open the submenu, touch the kV/mA display in col-
umn (8). The values can be adjusted with the –/+ keys.
To close the submenu, touch the light blue arrow at the
left margin of the submenu line. (See also section 3.2
"General touchscreen functions").
8
9 Operation
9.7 Selecting the exposure parameters
67