Tauro Essiccatori BIOSEC Warranty And Manual page 49

WARNING:
45°C, the dehydrator will stop, but the fan will continue to turn at top speed
to cool the motor and avoid damage.
The Biosec display will show a rotating version of the symbol in fig. 1.
fig. 1
MANUAL CONSERVATION MODE:
mode on Biosec even for programmes that do not include it or during a drying
cycle that has not yet finished. Just hold down the SET button for 5 seconds
during the cycle: the display will show the symbol in fig. 2 and the CONSER-
fig. 2
VATION program will be enabled, remaining active until Biosec is manually
switched off when you are ready to take out and put away your products.
IMPORTANT: TO ENABLE YOUR BIOSEC TO SELECT THE RIGHT OPERATING TEMPERATURE FOR
THE PRODUCT LOADED AND THE PROGRAM CHOSEN, DO NOT ACTIVATE THE MOTOR UNTIL IT
HAS BEEN PLACED IN POSITION INSIDE THE TUNNEL AND ALWAYS LOAD ALL THE TRAYS, EVEN
IF PARTIALLY OR TOTALLY EMPTY.
POWER FAILURES: in the event of a power failure, the dehydrator will restart in accordance with
the cycle set previously, but the display will show two flashing dots to indicate the anomaly. Always
check the condition of the products inside: they may have deteriorated if the power failure has
lasted any length of time.
50
if the machine is switched off at a working temperature of over
NEVER SWITCH BIOSEC OFF BY PULLING OUT THE PLUG.
ONLY TAKE THE PLUG OUT OF THE SOCKET WHEN THE MOTOR IS
NOT RUNNING.
www.Tauroessiccatori.com www.Tauroessiccatori.com
You can enable the conservation
E1, E2, E3 and E4 are the Biosec error codes: DO
NOT ATTEMPT TO DEAL WITH THE PROBLEM;
CONTACT THE AFTER-SALES SERVICE AT
ONCE AT: info@tauroessiccatori.com