Fastening The Cables - Christie LWU620i User Manual

Fastening the cables

Remove the screw located on the lower side of HDMI connector and use it to
attach the HDMI cable holder.
Fasten the HDMI cables by using the HDMI cable holder and the cable tie to pre-
vent them from coming off. Use a cable tie with the size of 2.0 x 4.0mm or smaller.
No cable tie
HDMI cable
holder
WARNING
CAUTION
with the size of 2.0 x 4.0mm or smaller.
cables and tie holder.
►Do not bind the cables too tightly. The cables or the hole might be damaged.
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
►Do not fasten the cables other than HDMI.
►To fasten the cable, use a supplied cable tie or plastic tie
screw
A metallic tie may cause damage to the
23
Setting up
With cable tie
cable tie
020-001279-01 Rev. 1 (10-2017)