Cleaning The Air Filters - PRONAR T669 Operator's Manual

Pronar T669
oil, grease, petrol etc. may cause damage and accelerate the ageing process. Bent conduits,
permanently deformed, cut or worn should be replaced.
IMPORTANT!
Repair, exchange or regeneration of pneumatic system components may only be
performed in a specialised workshop.

5.3.3 CLEANING THE AIR FILTERS

FIG. 5.8 Air filter
(1) securing slide lock, (2) air filter cover
DANGER
Before proceeding to dismantle filter, reduce pressure in supply conduit. While
disengaging filter slide gate, hold cover with other hand. Stand away from filter cover
vertical direction.
Depending on trailer working conditions, but not less than once in three months, take out and
clean air filter inserts, which are located in pneumatic system connection conduits. Inserts are
used many times and are not subject to changing unless they are mechanically damaged.
5.18
SECTION 5