Loading And Securing The Load - PRONAR PT512 Operator's Manual

Pronar PT512
Remove the cotter pin and remove the hitch pin (2) from the first trailer – figure
(4.2).
Adjust the height of the drawbar of the second trailer to enable coupling the
machines.
By reversing the tractor, insert the rear hitch of the first trailer onto the drawbar
of the second trailer
Insert the pin and the cotter pin.
Connect the pneumatic and hydraulic system lines and electrical cables
according to instructions contained in chapter (4.2).
Disconnecting the second trailer
Immobilize the tractor and the trailer with the parking brake.
Turn off the engine. Close the tractor cab and secure it against access by
unauthorized persons.
Disconnect the pneumatic and hydraulic system lines and electric cables
according to instructions contained in chapter (4.2).
Release the hitch pin in the first trailer. Remove the pin and the tractor away.
DANGER
The person assisting coupling the second trailer must stand in a place visible to the
tractor driver at all times. Exercise extreme caution and avoid dangerous areas – in
particular between both trailers.
ATTENTION
Do not couple the second trailer which does not have dual axle chassis.

4.4 LOADING AND SECURING THE LOAD

A canvas cover is used to secure the load. The cover must be used each time the trailer will
transport load on public roads.
4.10
CHAPTER 4