Table of Contents
Advertisement
Identifier
Version
Status
Disabling a forgotten password
The software security features include a 系统 password and a setup password. The password jumper enables the password
features or disables them and clears any passwords currently in use.
多数维修只能由经认证的维修技术人员进行。您只能根据产品说明文件中的授权，或者在联机或电话服务和支持
CAUTION:
团队的指导下进行故障排除和简单维修。任何未经 Dell 授权的服务所导致的损坏均不在保修范围之列。请阅读并遵循您的
产品附带的安全说明。
1. Turn off the 系统, including any attached peripherals, and disconnect the 系统 from the electrical outlet.
2. Open the 系统.
3. Move the jumper on the system board jumper from pins 4 and 6 to pins 2 and 4.
4. Close the 系统.
The existing passwords are not disabled (erased) until the 系统 boots with the jumper on pins 2 and 4. However, before you
assign a new 系统 m and/or setup password, move the jumper back to pins 4 and 6.
If you assign a new 系统 and/or setup password with the jumper on pins 2 and 4, the 系统 disables the new
NOTE:
passwords the next time it boots.
5. Reconnect the system board jumper to its electrical outlet and turn on the 系统, including any attached peripherals.
6. Turn off the 系统, including any attached peripherals, and disconnect the 系统 from the electrical outlet.
7. Open the 系统.
8. Move the jumper on the system board jumper from pins 2 and 4 to pins 4 and 6.
9. Close the 系统.
10. Reconnect the 系统 to its electrical outlet and turn on the 系统, including any attached peripherals.
11. Assign a new 系统 and/or setup password.
跳线和连接器
172
GUID-7B109312-821C-405C-8682-52C0195C503F
3
Released
Advertisement
Table of Contents
