8. Maintenance
8-1 Once A Month
8-1-1 Lubrication on Melt Tank Unit
This section shows required maintenance
once in a month.
WARNING
Ware gloves on your hands when melt
tank is lubricated. Melt tank is heated
up to 200˚C.
1.
Open safety cover.
2.
Lubricate marked parts of melt tank unit
with a supplied melt tank chain oil.
8-1-2 Greasing on Clamper Rail
1.
Wipe off all dust on clamper rail.
2.
Grease both back and front of clamper
rail.
8-1-3 Oiling on Nipper Unit
1.
Pull oil pump lever once to lead oil to
slide part of nipper unit.
NOTE
It is not necessary to push oil pump lever.
Lever will move back automatically.
Lubrication Points
Clamper Rail
Oil Pump Lever
62