10. Installation of Friction Cover Feeder CF-220
10-2 Set Up
10-2-3 Attachment of Accessories
- To prevent misfeeding of cover caused by
dart on support roller, support roller cleaner
is recommended to use.
- To prevent cover moves back, cover feeding
supporter is recommended to use.
NOTE
Supply a few drops of alcohol on cloth of
support roller cleaner.
1.
Loosen fix screws on feed support roller
cleaners and cover feeding supporter.
2.
Place support roller cleaner so that pad is
placed on roller and the other end is placed
under fix screw. And then fasten fix screw.
3.
Attach cover feeding supporter under
middle fix screw and fasten fix screw.
Fix Screws
Support Roller
Cleaner
Fix Screw
Support Roller Cleaner
Middle Fix Screw
86
Fix Screw
Pad
Support Roller
Cover Feeding Supporter