8-2 As Required
6.
Remove roughening cutter.
- Hold tip of roughening cutter with thick
cloth.
- Loosen roughening cutter lock screw with
allen wrench.
- Pull out roughening cutter.
NOTE
- Spring under roughening cuter will jump
out. Remove roughening cutter slowly.
- Roughening cutter is reversible parts.
7.
Install new or reversed roughening
cutter.
- Push down roughening cutter with thick
cloth and fix lock screw.
- Place roughening cutter height gauge over
roughening cutter.
NOTE
Select either 0.5 mm or 0.8 mm for required
height of cutter.
- Loosen lock screw once. Roughening
cutter will move up. Then fix lock screw
firmly.
8.
Close all safety and P.C.B. cover.
Roughening Cutter
Height Gauge
Roughening
Cutter
65
8. maintenance
Allen Wrench
Roughening
Cutter
Screw
Spring