4. Set Up BQ-260
4-3 Milling Unit Set Up
4-3-2 Milling Depth Set Up
WARNING
Be sure to depress stop button before
adjusting milling depth and do not
touch milling cutter. Sharp cutter can
cause severe personal injury.
Necessary Tools : Allen Wrench (6 mm)
Pipe Wrench and Special
Wrench
1.
Depress stop button.
2.
Open safety cover.
3.
Loosen lock screw on milling depth
adjusting bolt with allen wrench (6 mm).
4.
Adjust milling depth.
- Turn milling depth adjusting bolt with
pipe wrench to select milling depth.
- Align number on scale with pointer bar to
select required milling depth.
NOTE
- Unit on scale is mm.
- Milling depth is adjusted to 2 mm before
shipment.
5.
Fasten fix screw on milling depth adjust-
ing bolt with allen wrench.
6.
Close safety cover.
Safety Cover
Lock Screw
Pointer Bar
Milling Depth
Adjusting Bolt
28
Stop Button
Allen Wrench
Pipe Wrench
Fix Screw
Scale
2
1