9-3 Troubleshooting
9-3-2 When Two Covers are fed at the same time.
(Cause 1)
Sucker air is too strong.
(Countermeasure 1)
Move suction air adjusting ring to the left
and open valve slit.
(Cause 2)
Sheet separator position is not close
enough to cover.
(Countermeasure 1)
Adjust sheet separator adjusting lever so
that sheet separator come out more to
cover side.
(Cause 3)
Table height is too high.
(Countermeasure 1)
Lower table by turning table height ad-
justing knob counterclockwise.
(Cause 4)
Cover does not touch front guide.
(Countermeasure 1)
Place cover so that it touches front guide
tightly and hold cover corner with back
guide tightly.
9. Installation of Suction Cover Feeder CF-260
Suction Air
Adjustment Ring
Table Height
Adjusting Knob
77
Valve Slit
Sheet Separator
Adjusting Lever